制作openstack离线 yum 源
启动克隆好的虚拟机，改 hostname 、 ip再次检查一下 selinux 和防火墙状态，确保在系统初始化设置时就已经关闭。2 、从阿里云下载 yum 配置文件添加 ceph-nautilus 源3 、安装相关软件包4 、创建仓库目录4 、根据 CentOS-Base.repo 同步阿里云软件包到本地如果只想同步 CentOS-Base.repo 中指定块 [section] 中的 rpm 包
·
启动克隆好的虚拟机，改 hostname 、 ip
# hostnamectl set-hostname yum01
# sed -i 's/59.251/59.250/g' /etc/sysconfig/network-scripts/ifcfg-ens33
# systemctl restart network
# ping www.baidu.com
再次检查一下 selinux 和防火墙状态，确保在系统初始化设置时就已经关闭。
2 、从阿里云下载 yum 配置文件
# cd /etc/yum.repos.d && mkdir backup && mv *.repo backup/
# curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
# sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo
# yum -y install centos-release-openstack-train
添加 ceph-nautilus 源
vim /etc/yum.repos.d/ceph.repo
[ceph]
name=Ceph packages for $basearch
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/x86_64
enabled=1
gpgcheck=0
[ceph-noarch]
name=Ceph noarch packages
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/noarch
enabled=1
gpgcheck=0
[ceph-source]
name=Ceph source packages
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/SRPMS
enabled=1
gpgcheck=0
3 、安装相关软件包
# yum -y install createrepo yum-utils httpd reposync
# systemctl enable httpd && systemctl start httpd
4 、创建仓库目录
# mkdir -p /var/www/html/yumrepos
4 、根据 CentOS-Base.repo 同步阿里云软件包到本地
# reposync -p /var/www/html/yumrepos/
如果只想同步 CentOS-Base.repo 中指定块 [section] 中的 rpm 包，可以指定名称同步
# reposync -n --repoid=base --repoid=updates -p /var/www/html/yumrepos/
# reposync -n --repoid=ceph --repoid=ceph-noarch -p /var/www/html/yumrepos/
# reposync -n --repoid=centos-openstack-train -p /var/www/html/yumrepos/
# reposync -n --repoid=centos-qemu-ev -p /var/www/html/yum
说明：以上仓库必须同步到本地
此处再以 zabbix 离线源为例
安装 zabbix-4.0 的 yum 源配置文件
# rpm -Uvh https://repo.zabbix.com/zabbix/4.0/rhel/7/x86_64/zabbix-release-4.0-2.el7.noarch.rpm
安装好 zabbix-release-4.0-2.el7.noarch.rpm 会在/etc/yum.repos.d/ 下生成 zabbix.repo 文件
# cat /etc/yum.repos.d/zabbix.repo
[zabbix]
name=Zabbix Official Repository - $basearch
baseurl=http://repo.zabbix.com/zabbix/4.0/rhel/7/$basearch/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
[zabbix-debuginfo]
name=Zabbix Official Repository debuginfo - $basearch
baseurl=http://repo.zabbix.com/zabbix/4.0/rhel/7/$basearch/debuginfo/
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
gpgcheck=1
[zabbix-non-supported]
name=Zabbix Official Repository non-supported - $basearch
baseurl=http://repo.zabbix.com/non-supported/rhel/7/$basearch/
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX
gpgcheck=1
只同步[zabbix]块中的 rpm 包到本地
# reposync -n --repoid=zabbix -p /var/www/html/yumrepos/
OpenResty的安装：在线YUM安装
yum install yum-utils
#yum-config-manager --add-repo https://openresty.org/package/centos/openresty.repo
[root@yum01 yum.repos.d]# ls
backup ceph.repo
CentOS-Base.repo docker-ce.repo
CentOS-Ceph-Nautilus.repo epel.repo
CentOS-NFS-Ganesha-28.repo epel-testing.repo
CentOS-OpenStack-train.repo openresty.repo
CentOS-QEMU-EV.repo zabbix.repo
CentOS-Storage-common.repo
[root@yum01 yum.repos.d]# reposync -n --repoid=openresty -p /var/www/html/yumrepos/
openresty | 2.9 kB 00:00
openresty/7/x86_64/primary_db | 56 kB 00:00
warning: /var/www/html/yumrepos/openresty/openresty-1.21.4.1-1.el7.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID d5edeb74: NOKEY
Public key for openresty-1.21.4.1-1.el7.x86_64.rpm is not installed
(1/46): openresty-1.21.4.1-1.el7.x86_64.rpm | 1.1 MB 00:00
(2/46): openresty-asan-debuginfo-1.21.4.1-1.el7. | 4.9 MB 00:00
(3/46): openresty-debug-1.21.4.1-1.el7.x86_64.rp | 1.2 MB 00:00
(4/46): openresty-debug-debuginfo-1.21.4.1-1.el7 | 1.6 MB 00:00
(5/46): openresty-debuginfo-1.21.4.1-1.el7.x86_6 | 3.4 MB 00:00
(6/46): openresty-doc-1.21.4.1-1.el7.noarch.rpm | 609 kB 00:00
(7/46): openresty-openssl-1.1.0l-2.el7.x86_64.rp | 1.4 MB 00:00
(8/46): openresty-openssl-asan-1.1.0l-2.el7.x86_ | 1.9 MB 00:00
(9/46): openresty-openssl-asan-debuginfo-1.1.0l- | 1.9 MB 00:00
(10/46): openresty-openssl-asan-devel-1.1.0l-2.e | 1.9 MB 00:00
(11/46): openresty-asan-1.21.4.1-1.el7.x86_64.rp | 2.2 MB 00:03
(12/46): openresty-openssl-debug-1.1.0l-2.el7.x8 | 1.0 MB 00:00
(13/46): openresty-openssl-debug-devel-1.1.0l-2. | 1.1 MB 00:00
(14/46): openresty-openssl-debug-debuginfo-1.1.0 | 1.3 MB 00:00
(15/46): openresty-openssl-debuginfo-1.1.0l-2.el | 2.9 MB 00:00
(16/46): openresty-openssl111-1.1.1s-1.el7.x86_6 | 1.6 MB 00:00
(17/46): openresty-openssl-devel-1.1.0l-2.el7.x8 | 1.5 MB 00:00
(18/46): openresty-openssl111-asan-1.1.1s-1.el7. | 1.8 MB 00:00
(19/46): openresty-openssl111-asan-devel-1.1.1s- | 1.9 MB 00:00
(20/46): openresty-openssl111-debug-1.1.1s-1.el7 | 1.2 MB 00:00
(21/46): openresty-openssl111-asan-debuginfo-1.1 | 4.3 MB 00:01
(22/46): openresty-openssl111-debug-debuginfo-1. | 2.0 MB 00:00
(23/46): openresty-openssl111-debug-devel-1.1.1s | 1.3 MB 00:00
(24/46): openresty-openssl111-devel-1.1.1s-1.el7 | 1.7 MB 00:00
(25/46): openresty-opm-1.21.4.1-1.el7.noarch.rpm | 20 kB 00:00
(26/46): openresty-pcre-8.45-1.el7.x86_64.rpm | 151 kB 00:00
(27/46): openresty-openssl111-debuginfo-1.1.1s-1 | 3.9 MB 00:01
(28/46): openresty-pcre-asan-8.45-1.el7.x86_64.r | 216 kB 00:00
(29/46): openresty-pcre-asan-debuginfo-8.45-1.el | 366 kB 00:00
(30/46): openresty-pcre-asan-devel-8.45-1.el7.x8 | 225 kB 00:00
(31/46): openresty-pcre-debuginfo-8.45-1.el7.x86 | 276 kB 00:00
(32/46): openresty-resty-1.21.4.1-1.el7.noarch.r | 14 kB 00:00
(33/46): openresty-pcre-devel-8.45-1.el7.x86_64. | 166 kB 00:00
(34/46): openresty-valgrind-1.21.4.1-1.el7.x86_6 | 1.2 MB 00:00
(35/46): openresty-zlib-1.2.12-1.el7.x86_64.rpm | 54 kB 00:00
(36/46): openresty-zlib-asan-1.2.12-2.el7.x86_64 | 78 kB 00:00
(37/46): openresty-zlib-asan-debuginfo-1.2.12-2. | 129 kB 00:00
(38/46): openresty-zlib-asan-devel-1.2.12-2.el7. | 108 kB 00:00
(39/46): openresty-zlib-debuginfo-1.2.12-1.el7.x | 107 kB 00:00
(40/46): openresty-zlib-devel-1.2.12-1.el7.x86_6 | 85 kB 00:00
(41/46): openresty-valgrind-debuginfo-1.21.4.1-1 | 1.6 MB 00:00
(42/46): perl-Lemplate-0.15-1.el7.centos.noarch. | 75 kB 00:00
(43/46): perl-Spiffy-0.46-3.el7.centos.noarch.rp | 36 kB 00:00
(44/46): perl-Test-Base-0.88-2.el7.centos.noarch | 47 kB 00:00
(45/46): perl-Test-LongString-0.17-1.el7.centos. | 14 kB 00:00
(46/46): perl-Test-Nginx-0.29-2.el7.noarch.rpm | 111 kB 00:00
[root@yum01 yum.repos.d]# ^C
centos7 离线安装docker-ce
#添加docker repo
# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
[root@yum01 yum.repos.d]# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
Loaded plugins: fastestmirror, langpacks
adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
[root@yum01 yum.repos.d]# ls
backup CentOS-Storage-common.repo
CentOS-Base.repo ceph.repo
CentOS-Ceph-Nautilus.repo docker-ce.repo
CentOS-NFS-Ganesha-28.repo epel.repo
CentOS-OpenStack-train.repo epel-testing.repo
CentOS-QEMU-EV.repo zabbix.repo
[root@yum01 yum.repos.d]# reposync -n --repoid=doc^Cr-ce -p /var/www/html/yumrepos/
[root@yum01 yum.repos.d]# cat docker-ce.repo
[docker-ce-stable]
name=Docker CE Stable - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/stable
enabled=1
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-test]
name=Docker CE Test - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-test-debuginfo]
name=Docker CE Test - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-test-source]
name=Docker CE Test - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-nightly]
name=Docker CE Nightly - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-nightly-debuginfo]
name=Docker CE Nightly - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-nightly-source]
name=Docker CE Nightly - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[root@yum01 yum.repos.d]# reposync -n --repoid=docker-ce --repoid=docker-ce-stable -p /var/www/html/yumrepos/
docker-ce-stable | 3.5 kB 00:00
(1/2): docker-ce-stable/7/x86_64/updateinfo | 55 B 00:00
(2/2): docker-ce-stable/7/x86_64/primary_db | 88 kB 00:00
Warning: cannot find repository docker-ce
warning: /var/www/html/yumrepos/docker-ce-stable/Packages/docker-ce-20.10.21-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
Public key for docker-ce-20.10.21-3.el7.x86_64.rpm is not installed
(1/7): docker-ce-20.10.21-3.el7.x86_64.rpm | 22 MB 00:09
(2/7): containerd.io-1.6.10-3.1.el7.x86_64.rpm | 33 MB 00:14
(3/7): docker-ce-rootless-extras-20.10.21-3.el7. | 8.5 MB 00:02
(4/7): docker-ce-cli-20.10.21-3.el7.x86_64.rpm | 30 MB 00:08
(5/7): docker-ce-selinux-17.03.3.ce-1.el7.noarch | 29 kB 00:00
(6/7): docker-scan-plugin-0.21.0-3.el7.x86_64.rp | 3.8 MB 00:01
(7/7): docker-compose-plugin-2.12.2-3.el7.x86_64 | 10 MB 00:03
[root@yum01 yum.repos.d]# ls
backup CentOS-Storage-common.repo
CentOS-Base.repo ceph.repo
CentOS-Ceph-Nautilus.repo docker-ce.repo
CentOS-NFS-Ganesha-28.repo epel.repo
CentOS-OpenStack-train.repo epel-testing.repo
CentOS-QEMU-EV.repo zabbix.repo
[root@yum01 yum.repos.d]#
RHEL / CentOS 配置epel源
#yum install epel-release
#reposync -n --repoid=epel -p /var/www/html/yumrepos/
操作系统版本如果是8以下可以直接wget已配置好的repo文件，根据你目前使用的操作系统配置对应的源就OK
epel (RHEL 7)
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
5、使用 createrepo 命令创建本地 yum 源，即为存放于本地特定位置的众多 rpm 包建立索引，描述各包所需依赖信息，并形成元数据
进到 /var/www/html/yumrepos/ 目录下的每一个目录执行 createrepo . 命令
# cd /var/www/html/yumrepos/base
# createrepo .
6、定期更新
# reposync -n --repoid=base -p /var/www/html/yumrepos/
# cd /var/www/html/yumrepos/base
# createrepo --update . // 或者使用命令 createrepo --update /var/www/html/yumrepos/base
按上述方法，将 openstack 所依赖的 rpm 包全部下载到本地
2 使用离线 yum 源
1、在 template 模板主机上执行
# cd /etc/yum.repos.d/ && mkdir backup && mv *.repo backup/
# wget http://yum01/private.repo -O /etc/yum.repos.d/private.repo
yum 客户端在执行 yum update 时可能会出现如下包冲突情况。
处理方法：根据提示卸载对应包，再执行 update
# yum erase PyQt4-4.10.1-13.el7.x86_64 sip-4.14.6-4.el7.x86_64 -y
# yum update -y
/*
更新完成后， 在/etc/yum.repos.d/目录下会重新生成缺省的 repo 文件，需要先移除，才能继续下一步。
*/
安装 OpenStack 客户端
#yum -y install python-openstackclient
完成更新后，重启一下系统，确保没有问题。
关闭 template 虚拟机，基于更新后的 template 虚拟机进行克隆，需克隆 6 台主机，包括 controller、compute01、compute02、ceph01、ceph02、ceph03
在源主机上创建private.repo
/*
Private.repo
[base]
name=CentOS-$releasever - Base
baseurl=http://yum01/yumrepos/base/
gpgcheck=0
enabled=1
[epel]
name=CentOS-$releasever - epel
baseurl=http://yum01/yumrepos/epel/
gpgcheck=0
enabled=1
[docker-ce-stable]
name=CentOS-$releasever - docker-ce-stable
baseurl=http://yum01/yumrepos/docker-ce-stable/
gpgcheck=0
17 来 bilibili 关注：itcooking
enabled=1
[updates]
name=CentOS-$releasever - Updates
baseurl=http://yum01/yumrepos/updates/
gpgcheck=0
enabled=1
[extras]
name=CentOS-$releasever - Extras
baseurl=http://yum01/yumrepos/extras/
gpgcheck=0
enabled=1
[centos-openstack-train]
name=CentOS-7 - OpenStack train
baseurl=http://yum01/yumrepos/centos-openstack-train/
gpgcheck=0
enabled=1
[centos-qemu-ev]
name=CentOS-$releasever - QEMU EV
baseurl=http://yum01/yumrepos/centos-qemu-ev/
gpgcheck=0
enabled=1
[ceph]
name=ceph-Nautilus
baseurl=http://yum01/yumrepos/ceph/
gpgcheck=0
enabled=1
[ceph-noarch]
name=ceph-noarch Nautilus
baseurl=http://yum01/yumrepos/ceph-noarch/
gpgcheck=0
enabled=1
[centos-nfs-ganesha28]
name=CentOS-7 - NFS Ganesha 2.8
baseurl=http://yum01/yumrepos/centos-nfs-ganesha28/
gpgcheck=0
enabled=1
[openresty]
name=Official OpenResty Open Source Repository for CentOS
baseurl=http://yum01/yumrepos/openresty/
skip_if_unavailable=False
gpgcheck=0
repo_gpgcheck=0
gpgkey=file:///etc/yum.repos.d/pubkey.gpg
enabled=1
enabled_metadata=1
*/
安装 OpenStack 客户端
[root@template yum.repos.d]# yum -y install python-openstackclient
Loaded plugins: fastestmirror, langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* base: mirrors.ustc.edu.cn
* extras: mirrors.cqu.edu.cn
* updates: mirrors.ustc.edu.cn
Resolving Dependencies
--> Running transaction check
---> Package python2-openstackclient.noarch 0:4.0.2-1.el7 will be installed
--> Processing Dependency: python-openstackclient-lang = 4.0.2-1.el7 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-oslo-utils >= 3.33.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-oslo-i18n >= 3.15.3 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-osc-lib >= 1.14.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-openstacksdk >= 0.17.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-novaclient >= 1:15.0.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-neutronclient >= 6.7.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-keystoneclient >= 1:3.17.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-keystoneauth1 >= 3.6.2 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-glanceclient >= 1:2.8.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-cinderclient >= 3.3.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-pbr for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-cliff for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-babel for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Running transaction check
---> Package python-openstackclient-lang.noarch 0:4.0.2-1.el7 will be installed
---> Package python2-babel.noarch 0:2.6.0-4.el7 will be installed
---> Package python2-cinderclient.noarch 0:5.0.2-1.el7 will be installed
--> Processing Dependency: python2-simplejson for package: python2-cinderclient-5.0.2-1.el7.noarch
--> Processing Dependency: python2-prettytable for package: python2-cinderclient-5.0.2-1.el7.noarch
---> Package python2-cliff.noarch 0:2.16.0-2.el7 will be installed
--> Processing Dependency: python2-stevedore >= 1.20.0 for package: python2-cliff-2.16.0-2.el7.noarch
--> Processing Dependency: python2-cmd2 >= 0.6.7 for package: python2-cliff-2.16.0-2.el7.noarch
--> Processing Dependency: python2-unicodecsv for package: python2-cliff-2.16.0-2.el7.noarch
---> Package python2-glanceclient.noarch 1:2.17.1-1.el7 will be installed
--> Processing Dependency: python-wrapt for package: 1:python2-glanceclient-2.17.1-1.el7.noarch
--> Processing Dependency: python-warlock for package: 1:python2-glanceclient-2.17.1-1.el7.noarch
---> Package python2-keystoneauth1.noarch 0:3.17.4-1.el7 will be installed
--> Processing Dependency: python2-os-service-types >= 1.2.0 for package: python2-keystoneauth1-3.17.4-1.el7.noarch
--> Processing Dependency: python2-iso8601 >= 0.1.11 for package: python2-keystoneauth1-3.17.4-1.el7.noarch
---> Package python2-keystoneclient.noarch 1:3.21.0-2.el7 will be installed
--> Processing Dependency: python2-oslo-serialization >= 2.18.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python2-oslo-config >= 2:5.2.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python2-debtcollector >= 1.2.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python-keyring >= 5.5.1 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
---> Package python2-neutronclient.noarch 0:6.14.1-1.el7 will be installed
--> Processing Dependency: python2-oslo-log >= 3.36.0 for package: python2-neutronclient-6.14.1-1.el7.noarch
--> Processing Dependency: python2-os-client-config >= 1.28.0 for package: python2-neutronclient-6.14.1-1.el7.noarch
---> Package python2-novaclient.noarch 1:15.1.1-1.el7 will be installed
---> Package python2-openstacksdk.noarch 0:0.36.5-1.el7 will be installed
--> Processing Dependency: python2-requestsexceptions >= 1.2.0 for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-jsonpatch >= 1.16 for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-munch for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-jmespath for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-dogpile-cache for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-appdirs for package: python2-openstacksdk-0.36.5-1.el7.noarch
---> Package python2-osc-lib.noarch 0:1.14.1-2.el7 will be installed
---> Package python2-oslo-i18n.noarch 0:3.24.0-2.el7 will be installed
--> Processing Dependency: python-oslo-i18n-lang = 3.24.0-2.el7 for package: python2-oslo-i18n-3.24.0-2.el7.noarch
---> Package python2-oslo-utils.noarch 0:3.41.6-1.el7 will be installed
--> Processing Dependency: python-oslo-utils-lang = 3.41.6-1.el7 for package: python2-oslo-utils-3.41.6-1.el7.noarch
--> Processing Dependency: python2-monotonic for package: python2-oslo-utils-3.41.6-1.el7.noarch
--> Processing Dependency: python2-funcsigs for package: python2-oslo-utils-3.41.6-1.el7.noarch
---> Package python2-pbr.noarch 0:5.1.2-2.el7 will be installed
--> Running transaction check
---> Package python-keyring.noarch 0:5.7.1-1.el7 will be installed
---> Package python-oslo-i18n-lang.noarch 0:3.24.0-2.el7 will be installed
---> Package python-oslo-utils-lang.noarch 0:3.41.6-1.el7 will be installed
---> Package python-prettytable.noarch 0:0.7.2-3.el7 will be installed
---> Package python-unicodecsv.noarch 0:0.14.1-4.el7 will be installed
---> Package python-warlock.noarch 0:1.0.1-1.el7 will be installed
--> Processing Dependency: python-jsonschema for package: python-warlock-1.0.1-1.el7.noarch
---> Package python2-appdirs.noarch 0:1.4.4-1.el7 will be installed
---> Package python2-cmd2.noarch 0:0.8.8-5.el7 will be installed
--> Processing Dependency: python2-wcwidth for package: python2-cmd2-0.8.8-5.el7.noarch
--> Processing Dependency: python2-pyperclip for package: python2-cmd2-0.8.8-5.el7.noarch
--> Processing Dependency: python2-contextlib2 for package: python2-cmd2-0.8.8-5.el7.noarch
---> Package python2-debtcollector.noarch 0:1.22.0-2.el7 will be installed
---> Package python2-dogpile-cache.noarch 0:0.6.8-1.el7 will be installed
---> Package python2-funcsigs.noarch 0:1.0.2-4.el7 will be installed
---> Package python2-iso8601.noarch 0:0.1.11-8.el7 will be installed
---> Package python2-jmespath.noarch 0:0.9.4-2.el7 will be installed
---> Package python2-jsonpatch.noarch 0:1.21-1.el7 will be installed
--> Processing Dependency: python2-jsonpointer for package: python2-jsonpatch-1.21-1.el7.noarch
---> Package python2-monotonic.noarch 0:1.5-1.el7 will be installed
---> Package python2-munch.noarch 0:2.2.0-2.el7 will be installed
---> Package python2-os-client-config.noarch 0:1.33.0-2.el7 will be installed
---> Package python2-os-service-types.noarch 0:1.7.0-2.el7 will be installed
---> Package python2-oslo-config.noarch 2:6.11.3-1.el7 will be installed
--> Processing Dependency: python2-rfc3986 >= 1.2.0 for package: 2:python2-oslo-config-6.11.3-1.el7.noarch
---> Package python2-oslo-log.noarch 0:3.44.3-1.el7 will be installed
--> Processing Dependency: python-oslo-log-lang = 3.44.3-1.el7 for package: python2-oslo-log-3.44.3-1.el7.noarch
--> Processing Dependency: python2-oslo-context >= 2.20.0 for package: python2-oslo-log-3.44.3-1.el7.noarch
---> Package python2-oslo-serialization.noarch 0:2.29.3-1.el7 will be installed
--> Processing Dependency: python2-msgpack >= 0.5.2 for package: python2-oslo-serialization-2.29.3-1.el7.noarch
---> Package python2-requestsexceptions.noarch 0:1.4.0-1.el7 will be installed
---> Package python2-simplejson.x86_64 0:3.16.0-5.el7 will be installed
---> Package python2-stevedore.noarch 0:1.31.0-2.el7 will be installed
---> Package python2-wrapt.x86_64 0:1.11.1-1.el7 will be installed
--> Running transaction check
---> Package python-oslo-log-lang.noarch 0:3.44.3-1.el7 will be installed
---> Package python2-contextlib2.noarch 0:0.5.5-8.el7 will be installed
---> Package python2-jsonpointer.noarch 0:1.10-4.el7 will be installed
---> Package python2-jsonschema.noarch 0:2.6.0-2.el7 will be installed
--> Processing Dependency: python-repoze-lru for package: python2-jsonschema-2.6.0-2.el7.noarch
---> Package python2-msgpack.x86_64 0:0.6.1-2.el7 will be installed
---> Package python2-oslo-context.noarch 0:2.23.1-1.el7 will be installed
---> Package python2-pyperclip.noarch 0:1.6.4-1.el7 will be installed
---> Package python2-rfc3986.noarch 0:1.3.0-1.el7 will be installed
---> Package python2-wcwidth.noarch 0:0.2.5-1.el7 will be installed
--> Processing Dependency: python2-backports-functools_lru_cache for package: python2-wcwidth-0.2.5-1.el7.noarch
--> Running transaction check
---> Package python-repoze-lru.noarch 0:0.4-3.el7 will be installed
---> Package python2-backports-functools_lru_cache.noarch 0:1.2.1-4.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
======================================================================
Package Arch Version Repository Size
======================================================================
Installing:
python2-openstackclient
noarch 4.0.2-1.el7 centos-openstack-train 1.1 M
Installing for dependencies:
python-keyring noarch 5.7.1-1.el7 centos-openstack-train 116 k
python-openstackclient-lang
noarch 4.0.2-1.el7 centos-openstack-train 53 k
python-oslo-i18n-lang
noarch 3.24.0-2.el7 centos-openstack-train 9.6 k
python-oslo-log-lang
noarch 3.44.3-1.el7 centos-openstack-train 8.9 k
python-oslo-utils-lang
noarch 3.41.6-1.el7 centos-openstack-train 8.9 k
python-prettytable noarch 0.7.2-3.el7 base 37 k
python-repoze-lru noarch 0.4-3.el7 centos-openstack-train 12 k
python-unicodecsv noarch 0.14.1-4.el7 epel 26 k
python-warlock noarch 1.0.1-1.el7 centos-openstack-train 14 k
python2-appdirs noarch 1.4.4-1.el7 epel 18 k
python2-babel noarch 2.6.0-4.el7 centos-openstack-train 5.7 M
python2-backports-functools_lru_cache
noarch 1.2.1-4.el7 epel 12 k
python2-cinderclient
noarch 5.0.2-1.el7 centos-openstack-train 234 k
python2-cliff noarch 2.16.0-2.el7 centos-openstack-train 89 k
python2-cmd2 noarch 0.8.8-5.el7 centos-openstack-train 105 k
python2-contextlib2 noarch 0.5.5-8.el7 centos-openstack-train 20 k
python2-debtcollector
noarch 1.22.0-2.el7 centos-openstack-train 28 k
python2-dogpile-cache
noarch 0.6.8-1.el7 centos-openstack-train 73 k
python2-funcsigs noarch 1.0.2-4.el7 epel 25 k
python2-glanceclient
noarch 1:2.17.1-1.el7
centos-openstack-train 141 k
python2-iso8601 noarch 0.1.11-8.el7 epel 20 k
python2-jmespath noarch 0.9.4-2.el7 epel 41 k
python2-jsonpatch noarch 1.21-1.el7 centos-openstack-train 21 k
python2-jsonpointer noarch 1.10-4.el7 centos-openstack-train 14 k
python2-jsonschema noarch 2.6.0-2.el7 centos-openstack-train 76 k
python2-keystoneauth1
noarch 3.17.4-1.el7 centos-openstack-train 416 k
python2-keystoneclient
noarch 1:3.21.0-2.el7
centos-openstack-train 242 k
python2-monotonic noarch 1.5-1.el7 centos-openstack-train 14 k
python2-msgpack x86_64 0.6.1-2.el7 centos-openstack-train 87 k
python2-munch noarch 2.2.0-2.el7 centos-openstack-train 16 k
python2-neutronclient
noarch 6.14.1-1.el7 centos-openstack-train 301 k
python2-novaclient noarch 1:15.1.1-1.el7
centos-openstack-train 221 k
python2-openstacksdk
noarch 0.36.5-1.el7 centos-openstack-train 768 k
python2-os-client-config
noarch 1.33.0-2.el7 centos-openstack-train 49 k
python2-os-service-types
noarch 1.7.0-2.el7 centos-openstack-train 31 k
python2-osc-lib noarch 1.14.1-2.el7 centos-openstack-train 72 k
python2-oslo-config noarch 2:6.11.3-1.el7
centos-openstack-train 224 k
python2-oslo-context
noarch 2.23.1-1.el7 centos-openstack-train 21 k
python2-oslo-i18n noarch 3.24.0-2.el7 centos-openstack-train 53 k
python2-oslo-log noarch 3.44.3-1.el7 centos-openstack-train 59 k
python2-oslo-serialization
noarch 2.29.3-1.el7 centos-openstack-train 29 k
python2-oslo-utils noarch 3.41.6-1.el7 centos-openstack-train 74 k
python2-pbr noarch 5.1.2-2.el7 centos-openstack-train 1.1 M
python2-pyperclip noarch 1.6.4-1.el7 centos-openstack-train 17 k
python2-requestsexceptions
noarch 1.4.0-1.el7 centos-openstack-train 11 k
python2-rfc3986 noarch 1.3.0-1.el7 epel 48 k
python2-simplejson x86_64 3.16.0-5.el7 centos-openstack-train 119 k
python2-stevedore noarch 1.31.0-2.el7 centos-openstack-train 56 k
python2-wcwidth noarch 0.2.5-1.el7 epel 38 k
python2-wrapt x86_64 1.11.1-1.el7 centos-openstack-train 48 k
Transaction Summary
======================================================================
Install 1 Package (+50 Dependent packages)
Total download size: 12 M
Installed size: 54 M
Downloading packages:
(1/51): python-openstackclient-lang-4.0.2-1.el7. | 53 kB 00:00
(2/51): python-keyring-5.7.1-1.el7.noarch.rpm | 116 kB 00:00
(3/51): python-oslo-i18n-lang-3.24.0-2.el7.noarc | 9.6 kB 00:00
(4/51): python-oslo-log-lang-3.44.3-1.el7.noarch | 8.9 kB 00:00
(5/51): python-oslo-utils-lang-3.41.6-1.el7.noar | 8.9 kB 00:00
(6/51): python-repoze-lru-0.4-3.el7.noarch.rpm | 12 kB 00:00
(7/51): python-warlock-1.0.1-1.el7.noarch.rpm | 14 kB 00:00
(8/51): python2-appdirs-1.4.4-1.el7.noarch.rpm | 18 kB 00:00
(9/51): python2-backports-functools_lru_cache-1. | 12 kB 00:00
(10/51): python-unicodecsv-0.14.1-4.el7.noarch.r | 26 kB 00:00
(11/51): python2-babel-2.6.0-4.el7.noarch.rpm | 5.7 MB 00:00
(12/51): python2-cinderclient-5.0.2-1.el7.noarch | 234 kB 00:00
warning: /var/cache/yum/x86_64/7/base/packages/python-prettytable-0.7.2-3.el7.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Public key for python-prettytable-0.7.2-3.el7.noarch.rpm is not installed
(13/51): python-prettytable-0.7.2-3.el7.noarch.r | 37 kB 00:00
(14/51): python2-cliff-2.16.0-2.el7.noarch.rpm | 89 kB 00:00
(15/51): python2-cmd2-0.8.8-5.el7.noarch.rpm | 105 kB 00:00
(16/51): python2-contextlib2-0.5.5-8.el7.noarch. | 20 kB 00:00
(17/51): python2-dogpile-cache-0.6.8-1.el7.noarc | 73 kB 00:00
(18/51): python2-glanceclient-2.17.1-1.el7.noarc | 141 kB 00:00
(19/51): python2-debtcollector-1.22.0-2.el7.noar | 28 kB 00:00
(20/51): python2-funcsigs-1.0.2-4.el7.noarch.rpm | 25 kB 00:00
(21/51): python2-jmespath-0.9.4-2.el7.noarch.rpm | 41 kB 00:00
(22/51): python2-iso8601-0.1.11-8.el7.noarch.rpm | 20 kB 00:00
(23/51): python2-jsonpatch-1.21-1.el7.noarch.rpm | 21 kB 00:00
(24/51): python2-jsonschema-2.6.0-2.el7.noarch.r | 76 kB 00:00
(25/51): python2-jsonpointer-1.10-4.el7.noarch.r | 14 kB 00:00
(26/51): python2-keystoneclient-3.21.0-2.el7.noa | 242 kB 00:00
(27/51): python2-keystoneauth1-3.17.4-1.el7.noar | 416 kB 00:00
(28/51): python2-monotonic-1.5-1.el7.noarch.rpm | 14 kB 00:00
(29/51): python2-munch-2.2.0-2.el7.noarch.rpm | 16 kB 00:00
(30/51): python2-neutronclient-6.14.1-1.el7.noar | 301 kB 00:00
(31/51): python2-msgpack-0.6.1-2.el7.x86_64.rpm | 87 kB 00:00
(32/51): python2-novaclient-15.1.1-1.el7.noarch. | 221 kB 00:00
(33/51): python2-openstacksdk-0.36.5-1.el7.noarc | 768 kB 00:00
(34/51): python2-openstackclient-4.0.2-1.el7.noa | 1.1 MB 00:00
(35/51): python2-os-client-config-1.33.0-2.el7.n | 49 kB 00:00
(36/51): python2-os-service-types-1.7.0-2.el7.no | 31 kB 00:00
(37/51): python2-osc-lib-1.14.1-2.el7.noarch.rpm | 72 kB 00:00
(38/51): python2-oslo-context-2.23.1-1.el7.noarc | 21 kB 00:00
(39/51): python2-oslo-config-6.11.3-1.el7.noarch | 224 kB 00:00
(40/51): python2-oslo-i18n-3.24.0-2.el7.noarch.r | 53 kB 00:00
(41/51): python2-oslo-log-3.44.3-1.el7.noarch.rp | 59 kB 00:00
(42/51): python2-oslo-serialization-2.29.3-1.el7 | 29 kB 00:00
(43/51): python2-oslo-utils-3.41.6-1.el7.noarch. | 74 kB 00:00
(44/51): python2-pyperclip-1.6.4-1.el7.noarch.rp | 17 kB 00:00
(45/51): python2-pbr-5.1.2-2.el7.noarch.rpm | 1.1 MB 00:00
(46/51): python2-requestsexceptions-1.4.0-1.el7. | 11 kB 00:00
(47/51): python2-simplejson-3.16.0-5.el7.x86_64. | 119 kB 00:00
(48/51): python2-stevedore-1.31.0-2.el7.noarch.r | 56 kB 00:00
(49/51): python2-wrapt-1.11.1-1.el7.x86_64.rpm | 48 kB 00:00
(50/51): python2-rfc3986-1.3.0-1.el7.noarch.rpm | 48 kB 00:00
(51/51): python2-wcwidth-0.2.5-1.el7.noarch.rpm | 38 kB 00:00
----------------------------------------------------------------------
Total 18 MB/s | 12 MB 00:00
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Importing GPG key 0xF4A80EB5:
Userid : "CentOS-7 Key (CentOS 7 Official Signing Key) <security@centos.org>"
Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
Package : centos-release-7-9.2009.1.el7.centos.x86_64 (@updates)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python2-pbr-5.1.2-2.el7.noarch 1/51
Installing : python2-babel-2.6.0-4.el7.noarch 2/51
Installing : python2-iso8601-0.1.11-8.el7.noarch 3/51
Installing : python2-stevedore-1.31.0-2.el7.noarch 4/51
Installing : python2-simplejson-3.16.0-5.el7.x86_64 5/51
Installing : python-prettytable-0.7.2-3.el7.noarch 6/51
Installing : python2-os-service-types-1.7.0-2.el7.noarch 7/51
Installing : python2-keystoneauth1-3.17.4-1.el7.noarch 8/51
Installing : python2-wrapt-1.11.1-1.el7.x86_64 9/51
Installing : python2-funcsigs-1.0.2-4.el7.noarch 10/51
Installing : python2-debtcollector-1.22.0-2.el7.noarch 11/51
Installing : python2-monotonic-1.5-1.el7.noarch 12/51
Installing : python2-oslo-context-2.23.1-1.el7.noarch 13/51
Installing : python2-pyperclip-1.6.4-1.el7.noarch 14/51
Installing : python2-msgpack-0.6.1-2.el7.x86_64 15/51
Installing : python2-jsonpointer-1.10-4.el7.noarch 16/51
Installing : python2-jsonpatch-1.21-1.el7.noarch 17/51
Installing : python-repoze-lru-0.4-3.el7.noarch 18/51
Installing : python2-jsonschema-2.6.0-2.el7.noarch 19/51
Installing : python-warlock-1.0.1-1.el7.noarch 20/51
Installing : python-oslo-i18n-lang-3.24.0-2.el7.noarch 21/51
Installing : python2-oslo-i18n-3.24.0-2.el7.noarch 22/51
Installing : python-oslo-log-lang-3.44.3-1.el7.noarch 23/51
Installing : python2-requestsexceptions-1.4.0-1.el7.noarch 24/51
Installing : python-unicodecsv-0.14.1-4.el7.noarch 25/51
Installing : python-openstackclient-lang-4.0.2-1.el7.noarch 26/51
Installing : python2-jmespath-0.9.4-2.el7.noarch 27/51
Installing : python-keyring-5.7.1-1.el7.noarch 28/51
Installing : python2-appdirs-1.4.4-1.el7.noarch 29/51
Installing : python2-munch-2.2.0-2.el7.noarch 30/51
Installing : python2-backports-functools_lru_cache-1.2.1-4. 31/51
Installing : python2-wcwidth-0.2.5-1.el7.noarch 32/51
Installing : python2-contextlib2-0.5.5-8.el7.noarch 33/51
Installing : python2-cmd2-0.8.8-5.el7.noarch 34/51
Installing : python2-cliff-2.16.0-2.el7.noarch 35/51
Installing : python2-dogpile-cache-0.6.8-1.el7.noarch 36/51
Installing : python2-openstacksdk-0.36.5-1.el7.noarch 37/51
Installing : python2-os-client-config-1.33.0-2.el7.noarch 38/51
Installing : python-oslo-utils-lang-3.41.6-1.el7.noarch 39/51
Installing : python2-oslo-utils-3.41.6-1.el7.noarch 40/51
Installing : python2-oslo-serialization-2.29.3-1.el7.noarch 41/51
Installing : python2-osc-lib-1.14.1-2.el7.noarch 42/51
Installing : 1:python2-novaclient-15.1.1-1.el7.noarch 43/51
Installing : 1:python2-glanceclient-2.17.1-1.el7.noarch 44/51
Installing : python2-cinderclient-5.0.2-1.el7.noarch 45/51
Installing : python2-rfc3986-1.3.0-1.el7.noarch 46/51
Installing : 2:python2-oslo-config-6.11.3-1.el7.noarch 47/51
Installing : 1:python2-keystoneclient-3.21.0-2.el7.noarch 48/51
Installing : python2-oslo-log-3.44.3-1.el7.noarch 49/51
Installing : python2-neutronclient-6.14.1-1.el7.noarch 50/51
Installing : python2-openstackclient-4.0.2-1.el7.noarch 51/51
Verifying : python2-rfc3986-1.3.0-1.el7.noarch 1/51
Verifying : python2-oslo-log-3.44.3-1.el7.noarch 2/51
Verifying : python-oslo-utils-lang-3.41.6-1.el7.noarch 3/51
Verifying : python2-oslo-utils-3.41.6-1.el7.noarch 4/51
Verifying : python2-dogpile-cache-0.6.8-1.el7.noarch 5/51
Verifying : python2-monotonic-1.5-1.el7.noarch 6/51
Verifying : python2-funcsigs-1.0.2-4.el7.noarch 7/51
Verifying : python2-contextlib2-0.5.5-8.el7.noarch 8/51
Verifying : python2-backports-functools_lru_cache-1.2.1-4. 9/51
Verifying : python2-openstacksdk-0.36.5-1.el7.noarch 10/51
Verifying : python2-neutronclient-6.14.1-1.el7.noarch 11/51
Verifying : 2:python2-oslo-config-6.11.3-1.el7.noarch 12/51
Verifying : python2-osc-lib-1.14.1-2.el7.noarch 13/51
Verifying : python2-iso8601-0.1.11-8.el7.noarch 14/51
Verifying : python2-oslo-context-2.23.1-1.el7.noarch 15/51
Verifying : python2-munch-2.2.0-2.el7.noarch 16/51
Verifying : python2-babel-2.6.0-4.el7.noarch 17/51
Verifying : 1:python2-glanceclient-2.17.1-1.el7.noarch 18/51
Verifying : python2-keystoneauth1-3.17.4-1.el7.noarch 19/51
Verifying : python2-appdirs-1.4.4-1.el7.noarch 20/51
Verifying : python2-wcwidth-0.2.5-1.el7.noarch 21/51
Verifying : 1:python2-novaclient-15.1.1-1.el7.noarch 22/51
Verifying : python2-debtcollector-1.22.0-2.el7.noarch 23/51
Verifying : python2-cliff-2.16.0-2.el7.noarch 24/51
Verifying : python-keyring-5.7.1-1.el7.noarch 25/51
Verifying : python2-openstackclient-4.0.2-1.el7.noarch 26/51
Verifying : python2-jmespath-0.9.4-2.el7.noarch 27/51
Verifying : python-openstackclient-lang-4.0.2-1.el7.noarch 28/51
Verifying : python-unicodecsv-0.14.1-4.el7.noarch 29/51
Verifying : python-prettytable-0.7.2-3.el7.noarch 30/51
Verifying : python2-oslo-i18n-3.24.0-2.el7.noarch 31/51
Verifying : python2-requestsexceptions-1.4.0-1.el7.noarch 32/51
Verifying : python-oslo-log-lang-3.44.3-1.el7.noarch 33/51
Verifying : python2-jsonschema-2.6.0-2.el7.noarch 34/51
Verifying : python-warlock-1.0.1-1.el7.noarch 35/51
Verifying : python2-wrapt-1.11.1-1.el7.x86_64 36/51
Verifying : python2-cmd2-0.8.8-5.el7.noarch 37/51
Verifying : python2-jsonpatch-1.21-1.el7.noarch 38/51
Verifying : python2-simplejson-3.16.0-5.el7.x86_64 39/51
Verifying : python-oslo-i18n-lang-3.24.0-2.el7.noarch 40/51
Verifying : python2-cinderclient-5.0.2-1.el7.noarch 41/51
Verifying : python2-os-client-config-1.33.0-2.el7.noarch 42/51
Verifying : python2-stevedore-1.31.0-2.el7.noarch 43/51
Verifying : python-repoze-lru-0.4-3.el7.noarch 44/51
Verifying : python2-jsonpointer-1.10-4.el7.noarch 45/51
Verifying : python2-msgpack-0.6.1-2.el7.x86_64 46/51
Verifying : python2-pyperclip-1.6.4-1.el7.noarch 47/51
Verifying : 1:python2-keystoneclient-3.21.0-2.el7.noarch 48/51
Verifying : python2-oslo-serialization-2.29.3-1.el7.noarch 49/51
Verifying : python2-pbr-5.1.2-2.el7.noarch 50/51
Verifying : python2-os-service-types-1.7.0-2.el7.noarch 51/51
Installed:
python2-openstackclient.noarch 0:4.0.2-1.el7
Dependency Installed:
python-keyring.noarch 0:5.7.1-1.el7
python-openstackclient-lang.noarch 0:4.0.2-1.el7
python-oslo-i18n-lang.noarch 0:3.24.0-2.el7
python-oslo-log-lang.noarch 0:3.44.3-1.el7
python-oslo-utils-lang.noarch 0:3.41.6-1.el7
python-prettytable.noarch 0:0.7.2-3.el7
python-repoze-lru.noarch 0:0.4-3.el7
python-unicodecsv.noarch 0:0.14.1-4.el7
python-warlock.noarch 0:1.0.1-1.el7
python2-appdirs.noarch 0:1.4.4-1.el7
python2-babel.noarch 0:2.6.0-4.el7
python2-backports-functools_lru_cache.noarch 0:1.2.1-4.el7
python2-cinderclient.noarch 0:5.0.2-1.el7
python2-cliff.noarch 0:2.16.0-2.el7
python2-cmd2.noarch 0:0.8.8-5.el7
python2-contextlib2.noarch 0:0.5.5-8.el7
python2-debtcollector.noarch 0:1.22.0-2.el7
python2-dogpile-cache.noarch 0:0.6.8-1.el7
python2-funcsigs.noarch 0:1.0.2-4.el7
python2-glanceclient.noarch 1:2.17.1-1.el7
python2-iso8601.noarch 0:0.1.11-8.el7
python2-jmespath.noarch 0:0.9.4-2.el7
python2-jsonpatch.noarch 0:1.21-1.el7
python2-jsonpointer.noarch 0:1.10-4.el7
python2-jsonschema.noarch 0:2.6.0-2.el7
python2-keystoneauth1.noarch 0:3.17.4-1.el7
python2-keystoneclient.noarch 1:3.21.0-2.el7
python2-monotonic.noarch 0:1.5-1.el7
python2-msgpack.x86_64 0:0.6.1-2.el7
python2-munch.noarch 0:2.2.0-2.el7
python2-neutronclient.noarch 0:6.14.1-1.el7
python2-novaclient.noarch 1:15.1.1-1.el7
python2-openstacksdk.noarch 0:0.36.5-1.el7
python2-os-client-config.noarch 0:1.33.0-2.el7
python2-os-service-types.noarch 0:1.7.0-2.el7
python2-osc-lib.noarch 0:1.14.1-2.el7
python2-oslo-config.noarch 2:6.11.3-1.el7
python2-oslo-context.noarch 0:2.23.1-1.el7
python2-oslo-i18n.noarch 0:3.24.0-2.el7
python2-oslo-log.noarch 0:3.44.3-1.el7
python2-oslo-serialization.noarch 0:2.29.3-1.el7
python2-oslo-utils.noarch 0:3.41.6-1.el7
python2-pbr.noarch 0:5.1.2-2.el7
python2-pyperclip.noarch 0:1.6.4-1.el7
python2-requestsexceptions.noarch 0:1.4.0-1.el7
python2-rfc3986.noarch 0:1.3.0-1.el7
python2-simplejson.x86_64 0:3.16.0-5.el7
python2-stevedore.noarch 0:1.31.0-2.el7
python2-wcwidth.noarch 0:0.2.5-1.el7
python2-wrapt.x86_64 0:1.11.1-1.el7
Complete!
[root@template yum.repos.d]#
华为开发者空间，是为全球开发者打造的专属开发空间，汇聚了华为优质开发资源及工具，致力于让每一位开发者拥有一台云主机，基于华为根生态开发、创新。
更多推荐
2
0- 0
已为社区贡献19条内容
所有评论(0)