作者简介：大家好，我是smart哥，前中兴通讯、美团架构师，现某互联网公司CTO

联系qq：184480602，加我进群，大家一起学习，一起进步，一起对抗互联网寒冬

学习必须往深处挖，挖的越深，基础越扎实！

阶段1、深入多线程

阶段2、深入多线程设计模式

阶段3、深入juc源码解析

阶段4、深入jdk其余源码解析

阶段5、深入jvm源码解析

码哥源码部分

码哥讲源码-原理源码篇【2024年最新大厂关于线程池使用的场景题】

码哥讲源码【炸雷啦！炸雷啦！黄光头他终于跑路啦！】

码哥讲源码-【jvm课程前置知识及c/c++调试环境搭建】

​​​​​​码哥讲源码-原理源码篇【揭秘join方法的唤醒本质上决定于jvm的底层析构函数】

码哥源码-原理源码篇【Doug Lea为什么要将成员变量赋值给局部变量后再操作？】

码哥讲源码【你水不是你的错,但是你胡说八道就是你不对了！】

码哥讲源码【谁再说Spring不支持多线程事务，你给我抽他！】

终结B站没人能讲清楚红黑树的历史，不服等你来踢馆！

打脸系列【020-3小时讲解MESI协议和volatile之间的关系，那些将x86下的验证结果当作最终结果的水货们请闭嘴】

对于一个能够支撑超高并发的大型分布式系统来说，像Redis这类分布式缓存是必不可少。Redis在单机部署的模式下，QPS几乎不可能超过10万+，除非机器配置特别好且Redis操作不太复杂。

我们知道，对于数据库来说，如果想要提升读写性能，最简单的方式就是做 一主多从+读写分离 。对于分布式缓存也是一样的道理，因为缓存一般都是用来支撑读请求的高并发，写请求相对较少（一般也就每秒一两千写请求），所以非常适合读写分离的架构。

关于Redis的复制原理，我在进阶篇的《分布式框架之高性能：Redis主从同步》已经详细讲解过了，不熟悉的读者可以先去了解下。

一、主从架构搭建

在生产环境下，我们必须要将Master节点的持久化功能打开，否则万一Master宕机后重启，此时Slave连上Master后，会触发一次全量复制，master就会将空的数据集同步到slave上去，导致Slave中的数据也被清空。

我们先来搭建一个一主二从的Redis构架，我首先在ressmix-dsf02这个节点上安装单机版本的Redis。具体的安装步骤不再赘述，读者可以参考我在《Redis持久化实战》中讲解的搭建步骤。

1.1 配置步骤

搭建完Redis节点后，我们按照以下步骤进行读写分离的配置，ressmix-dsf01作为Master，ressmix-dsf02和ressmix-dsf03作为Slave。（我这里只操作ressmix-dsf02，ressmix-dsf03读者可以自行操作）

1. 修改Slave节点的配置文件，配置replicaof ressmix-dsf01 6379，这样ressmix-dsf01节点就作为了ressmix-dsf02的Master节点；
2. 强制读写分离：修改Slave节点的配置文件，配置replica-read-only yes，这样Slave节点会拒绝所有的写操作（Redis 2.6以后Slave节点默认就是只读的，所以这个版本以后的Redis默认可以不设置）；
3. 集群安全认证：修改Slave节点的配置文件，配置masterauth ressmix，其中ressmix是我设置的认证密码；
4. 停止Master节点，然后修改Master节点的配置文件，配置requirepass ressmix；
5. 主从节点均配置appendonly yes，开启AOF持久化；
6. 绑定节点IP：修改Slave节点的配置文件，配置bind 192.168.0.109，其中192.168.0.109为ressmix-dsf02的IP，同理也把Master节点的这个配置修改下。另外，为了以防外一，每个节点都执行下iptables -A INPUT -ptcp --dport 6379 -j ACCEPT，用于放开6379端口，然后清理下防火墙：sudo iptables -F。

上述操作全部配置完成后，我们通过以下命令启动主节点，然后以相同方式启动从节点ressmix-dsf02。

    cd /etc/init.d
    ./redis_6379 start

节点启动后，我们可以先在Master节点中写入一条记录：

    redis-cli -h 192.168.0.107 -a ressmix
    set k1 v1

然后在ressmix-dsf02节点可以查看到同步过来的数据：

我们可以通过执行info replication查看主从复制的状态：

二、性能压测

搭建完Redis的主从架构后，可以对其做一个基准压测，测一下Redis的性能和QPS。Redis自身提供了redis-benchmark压测工具，可以用于一些简单场景下性能测试。

压测工具位于redis安装包的src目录下：

    ./redis-benchmark -h 192.168.0.107

常用参数如下：

    -c <clients>       Number of parallel connections (default 50)
    -n <requests>      Total number of requests (default 100000)
    -d <size>          Data size of SET/GET value in bytes (default 2)

我们可以根据自己系统高峰期的业务量来设置参数，比如在高峰期，瞬时最大用户量会达到10万，总请求数为1000万，每条数据的大小为50字节，则可以像下面这样模拟请求：

    ./redis-benchmark -h 192.168.0.107 -c 100000 -n 10000000 -d 50

压测的结果可能像下面这样，显示了不同操作的每秒请求数：

    ====== PING_INLINE ======
      100000 requests completed in 1.28 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    99.78% <= 1 milliseconds
    99.93% <= 2 milliseconds
    99.97% <= 3 milliseconds
    100.00% <= 3 milliseconds
    78308.54 requests per second
    
    ====== PING_BULK ======
      100000 requests completed in 1.30 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    99.87% <= 1 milliseconds
    100.00% <= 1 milliseconds
    76804.91 requests per second
    
    ====== SET ======
      100000 requests completed in 2.50 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    5.95% <= 1 milliseconds
    99.63% <= 2 milliseconds
    99.93% <= 3 milliseconds
    99.99% <= 4 milliseconds
    100.00% <= 4 milliseconds
    40032.03 requests per second
    
    ====== GET ======
      100000 requests completed in 1.30 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    99.73% <= 1 milliseconds
    100.00% <= 2 milliseconds
    100.00% <= 2 milliseconds
    76628.35 requests per second
    
    ====== INCR ======
      100000 requests completed in 1.90 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    80.92% <= 1 milliseconds
    99.81% <= 2 milliseconds
    99.95% <= 3 milliseconds
    99.96% <= 4 milliseconds
    99.97% <= 5 milliseconds
    100.00% <= 6 milliseconds
    52548.61 requests per second
    
    ====== LPUSH ======
      100000 requests completed in 2.58 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    3.76% <= 1 milliseconds
    99.61% <= 2 milliseconds
    99.93% <= 3 milliseconds
    100.00% <= 3 milliseconds
    38684.72 requests per second
    
    ====== RPUSH ======
      100000 requests completed in 2.47 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    6.87% <= 1 milliseconds
    99.69% <= 2 milliseconds
    99.87% <= 3 milliseconds
    99.99% <= 4 milliseconds
    100.00% <= 4 milliseconds
    40469.45 requests per second
    
    ====== LPOP ======
      100000 requests completed in 2.26 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    28.39% <= 1 milliseconds
    99.83% <= 2 milliseconds
    100.00% <= 2 milliseconds
    44306.60 requests per second
    
    ====== RPOP ======
      100000 requests completed in 2.18 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    36.08% <= 1 milliseconds
    99.75% <= 2 milliseconds
    100.00% <= 2 milliseconds
    45871.56 requests per second
    
    ====== SADD ======
      100000 requests completed in 1.23 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    99.94% <= 1 milliseconds
    100.00% <= 2 milliseconds
    100.00% <= 2 milliseconds
    81168.83 requests per second
    
    ====== SPOP ======
      100000 requests completed in 1.28 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    99.80% <= 1 milliseconds
    99.96% <= 2 milliseconds
    99.96% <= 3 milliseconds
    99.97% <= 5 milliseconds
    100.00% <= 5 milliseconds
    78369.91 requests per second
    
    ====== LPUSH (needed to benchmark LRANGE) ======
      100000 requests completed in 2.47 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    15.29% <= 1 milliseconds
    99.64% <= 2 milliseconds
    99.94% <= 3 milliseconds
    100.00% <= 3 milliseconds
    40420.37 requests per second
    
    ====== LRANGE_100 (first 100 elements) ======
      100000 requests completed in 3.69 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    30.86% <= 1 milliseconds
    96.99% <= 2 milliseconds
    99.94% <= 3 milliseconds
    99.99% <= 4 milliseconds
    100.00% <= 4 milliseconds
    27085.59 requests per second
    
    ====== LRANGE_300 (first 300 elements) ======
      100000 requests completed in 10.22 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    0.03% <= 1 milliseconds
    5.90% <= 2 milliseconds
    90.68% <= 3 milliseconds
    95.46% <= 4 milliseconds
    97.67% <= 5 milliseconds
    99.12% <= 6 milliseconds
    99.98% <= 7 milliseconds
    100.00% <= 7 milliseconds
    9784.74 requests per second
    
    ====== LRANGE_500 (first 450 elements) ======
      100000 requests completed in 14.71 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    0.00% <= 1 milliseconds
    0.07% <= 2 milliseconds
    1.59% <= 3 milliseconds
    89.26% <= 4 milliseconds
    97.90% <= 5 milliseconds
    99.24% <= 6 milliseconds
    99.73% <= 7 milliseconds
    99.89% <= 8 milliseconds
    99.96% <= 9 milliseconds
    99.99% <= 10 milliseconds
    100.00% <= 10 milliseconds
    6799.48 requests per second
    
    ====== LRANGE_600 (first 600 elements) ======
      100000 requests completed in 18.56 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    0.00% <= 2 milliseconds
    0.23% <= 3 milliseconds
    1.75% <= 4 milliseconds
    91.17% <= 5 milliseconds
    98.16% <= 6 milliseconds
    99.04% <= 7 milliseconds
    99.83% <= 8 milliseconds
    99.95% <= 9 milliseconds
    99.98% <= 10 milliseconds
    100.00% <= 10 milliseconds
    5387.35 requests per second
    
    ====== MSET (10 keys) ======
      100000 requests completed in 4.02 seconds
      50 parallel clients
      3 bytes payload
      keep alive: 1
    
    0.01% <= 1 milliseconds
    53.22% <= 2 milliseconds
    99.12% <= 3 milliseconds
    99.55% <= 4 milliseconds
    99.70% <= 5 milliseconds
    99.90% <= 6 milliseconds
    99.95% <= 7 milliseconds
    100.00% <= 8 milliseconds
    24869.44 requests per second

三、总结

本章，我重点讲解了如何进行生产环境的Redis读写分离部署，读者可以自己尝试在虚拟机中动手进行节点部署，以加深印象。