为虚拟机添加硬盘并进行分区

如果你的Linux硬盘空间不足，那么我们可以添加硬盘并且对其进行分区，下面是主要步骤：1.首先，把虚拟机中的系统关闭，如果现在不关闭的话，后面添加完硬盘还要重启。然后选择虚拟机》设置，在弹出的对话框中点击硬盘(SCSI)...

clhljaa02293633

1507人浏览 · 2014-09-16 09:49:45

clhljaa02293633 · 2014-09-16 09:49:45 发布

如果你的Linux硬盘空间不足，那么我们可以添加硬盘并且对其进行分区，下面是主要步骤：
1.首先，把虚拟机中的系统关闭，如果现在不关闭的话，后面添加完硬盘还要重启。然后选择
虚拟机》设置，在弹出的对话框中点击硬盘(SCSI),接着点击添加，就会出现添加硬件向导：硬盘》
SCSI(S)(推荐)》创建新虚拟磁盘》，设置磁盘大小，默认是20G。选择将虚拟磁盘拆分成多个文件。
2.打开虚拟机的Linux系统。执行fdisk -l:
[root@localhost ~]# fdisk -l

Disk /dev/sda: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 38 305203+ 83 Linux
/dev/sda2 39 12540 100422315 83 Linux
/dev/sda3 12541 13054 4128705 82 Linux swap / Solaris

Disk /dev/sdb: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdb doesn't contain a valid partition table

可以看到此时多了个sdb，但是并没有分区，下面我们为sdb进行分区：
输入命令fdisk /dev/sdb,在提示下输入m,就会出现以下列表，根据需要选择选项完成自己的需要。输入n,即为增加分区，接着输入p建立主分区，再输入1，下面会提示卷的起始地址和结束地址，回车默认就可以了。最后我们键入w保存并退出。
[root@localhost /]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

The number of cylinders for this disk is set to 2610.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-2610, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-2610, default 2610):
Using default value 2610

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

3.再次输入命令fdisk -l就可以看到多了/dev/sdb1了，说明我们已经成功为sdb添加了分区。
[root@localhost /]# fdisk -l

Disk /dev/sda: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 38 305203+ 83 Linux
/dev/sda2 39 12540 100422315 83 Linux
/dev/sda3 12541 13054 4128705 82 Linux swap / Solaris

Disk /dev/sdb: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 1 2610 20964793+ 83 Linux

4.接着，对新建立的分区进行格式化，格式化成ext3的系统：
[root@localhost /]# mkfs.ext3 /dev/sdb1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
2621440 inodes, 5241198 blocks
262059 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
160 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 38 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.

5.最后，我们就可以把/dev/sdb1挂载到新建的/u02目录了：
[root@localhost /]# mount /dev/sdb1 /u02
[root@localhost /]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 93G 18G 71G 21% /
/dev/sda1 289M 16M 259M 6% /boot
tmpfs 1014M 0 1014M 0% /dev/shm
/dev/scd0 23M 23M 0 100% /media/CDROM
/dev/scd1 2.8G 2.8G 0 100% /media/RHEL_5.4 i386 DVD
/dev/sdb1 20G 173M 19G 1% /u02

6.挂载成功之后，会在本次系统启动过程中生效，如果下次系统重启了，那么就会失去这次的挂载。

想要每次启动系统都自动挂载，可以在 /etc/fstab文件中加入如下一行内容：

/dev/sdb1 /u02 ext3 defaults 0 0

那么就可以保证即使系统重新启动/dev/sdb1也会自动挂载

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/29800581/viewspace-1270511/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/29800581/viewspace-1270511/