Jlink + Vmware虚拟机调试uboot 2012-07-06 11:06:17

分类: 嵌入式

以前的笔记丢了,重写一下,细节部分就不说了,还是比较简单的.

Jlink 版本V4.34d, 网上有人说V4.40以上不识别山寨JLINK V8

AOV@54)PL51IGP1[CI`Q5N2

 

 

 

 

 

 

 

 

 

 

 

 

注意Localhost only 不要选上,不让通过虚拟机连接时会连不上

我以前就没有注意这个,老版本直接可以连,新版本不能连了,还以为是软件取消了这个功能或者是软件bug

虚拟机的设置要设置成桥接,如果设置成NAT,开发板是看不见虚拟机的

设置为桥接,好要和开发主机在同一网段

我的HOST 192.168.1.18, 虚拟机 192.168.1.19

网管 192.168.1.2

 

 

uboot 连接脚本是0x33ff8000开始的,因为uboot开始的汇编是位置无关的,这部分代码负责copy uboot到0x33f80000

我们如果是在内存中调试的话,可以通过宏定义去掉这部分copy的代码

如果要在内存中调试,首先要初始化RAM,这部分内容要通过调试器gdb来完成

主要就是时钟,sdram刷新之类的时钟,网上搜来的配置

##main function defined for initial the S3C2440 CPU.

define reset_2440
    monitor endian little  ##little endian, should be the same as your application.
    ##copied from JLinkGDBServer Document.
    monitor reset            ##reset the S3C2440
    monitor reg cpsr = 0xd3  ##setup cpsr register.
    monitor speed auto       ##Link Speed.
    ##translated from VIVI S3C2440 version.
    #disable watchdog
    monitor MemU32 0x53000000 = 0
    #disalbe interrupt --- int-mask register
    monitor MemU32 0x4A000008 = 0xFFFFFFFF
    #disalbe interrupt --- int-sub-mask register
    monitor MemU32 0x4A00001C = 0x7FFF ## vivi set it as 0x7FF, why???
    #initialize system clocks --- locktime register
    monitor long 0x4C000000 = 0x00FFFFFF

    #initialize system clocks --- clock-divn register
    monitor long 0x4C000014 = 0x5            #CLKDVIN_400_148
#    monitor cp15 1 0 0 0
#    monitor cp15 1 0 0 0 =0xc0000078
    #initialize system clocks --- mpll register
    monitor long 0x4C000004 = 0x7f021    #default clock
    monitor long 0x4C000004 = 0x7f021    #default clock
    #setup memory controller
    monitor MemU32 0x48000000 = 0x22111110    #conw
    monitor MemU32 0x48000004 = 0x00000700    #bank0
    monitor MemU32 0x48000008 = 0x00000700     #bank1
    monitor MemU32 0x4800000c = 0x00000700     #bank2
    monitor MemU32 0x48000010 = 0x00000700     #bank3
    monitor MemU32 0x48000014 = 0x00000700     #bank4
    monitor MemU32 0x48000018 = 0x00000700     #bank5
    monitor MemU32 0x4800001c = 0x00018009     #bank6
    monitor MemU32 0x48000020 = 0x00018009     #bank7
    monitor MemU32 0x48000024 = 0x008c04F4    #vREFRESH HCLK: 100M
    monitor MemU32 0x48000028 = 0x32        #vBANKSIZE -- 128M/128M --- should
                                                       according to the physical
                                                       memory size? --- 0xB0 ??
    monitor MemU32 0x4800002c = 0x30        #vMRSRB6
    monitor MemU32 0x48000030 = 0x30        #vMRSRB7      
  end

  ##main function defined for connect to the TARGET.
  ##arg0 = IP address.
  ##arg1 = PORT number of JLINK gdb server.

  define connect_jlink
#    set $ip = 192.168.1.18
#    set $port = 2331
    target remote 192.168.1.18:2331
    reset_2440
  end

我用emacs调试uboot,gdb命令行

/usr/local/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-gdb --annotate=3 u-boot

执行后进入调试界面

(gdb) connect_jlink
0x00000000 in ?? ()
Target endianess set to "little endian"
Expected an decimal digit (0-9)
Writing register (CPSR = 0x000000D3)
Select auto JTAG speed (8000 kHz)
Writing 0x00000000 @ address 0x53000000
Writing 0xFFFFFFFF @ address 0x4A000008
Writing 0x00007FFF @ address 0x4A00001C
Writing 0xFF000000 @ address 0x4C000000
Writing 0x00000005 @ address 0x4C000014
Writing 0x0007F021 @ address 0x4C000004
Writing 0x22111110 @ address 0x48000000
Writing 0x00000700 @ address 0x48000004
Writing 0x00000700 @ address 0x48000008
Writing 0x00000700 @ address 0x4800000C
Writing 0x00000700 @ address 0x48000010
Writing 0x00000700 @ address 0x48000014
Writing 0x00000700 @ address 0x48000018
Writing 0x00018009 @ address 0x4800001C
Writing 0x00018009 @ address 0x48000020
Writing 0x008E04EB @ address 0x48000024
Writing 0x000000B2 @ address 0x48000028
Undefined command: "according".  Try "help".
(gdb) load
Loading section .text, size 0x2dd68 lma 0x33f80000
Loading section .rodata, size 0x64f4 lma 0x33fadd68
Loading section .data, size 0x562c lma 0x33fb425c
Loading section .u_boot_cmd, size 0x578 lma 0x33fb9888
Start address 0x33f80000, load size 237056
Transfer rate: 378 KB/sec, 13944 bytes/write.
(gdb) s

现在可以正常调试了,最后上一下截图

 

RI_2CW[TW%J~HI_RG~LG}S1


http://blog.chinaunix.net/uid-21977330-id-3257174.html

Logo

华为开发者空间,是为全球开发者打造的专属开发空间,汇聚了华为优质开发资源及工具,致力于让每一位开发者拥有一台云主机,基于华为根生态开发、创新。

更多推荐